ANYLOAD 363YH
363YH — Kolon ve Disk Tipi Yük Hücreleri
Ürün bilgisi
ANYLOAD 363YH, kolon ve disk tipi yük hücreleri kategorisinde yer alır. Kapasite: 1t – 300t. Gövde malzemesi: Alaşımlı çelik, Nickel Plated. Koruma: Kaynaklı sızdırmazlık / IP67.
İletişimKapasite / ürün seçenekleri
- 363YH-1t
- 363YH-2t
- 363YH-3t
- 363YH-5t
- 363YH-10t
- 363YH-20t
- 363YH-30t
- 363YH-50t
- 363YH-100t
- 363YH-150t
- 363YH-200t
- 363YH-300t
- MH363YH-(1t-5t) -- Mounting Hardware
- MH363YH-(10t-20t) -- Mounting Hardware
- MH363YH-30t -- Mounting Hardware
- MH363YH-50t -- Mounting Hardware
- MH363YH-100t -- Mounting Hardware
- MH363YH-(150t-200t) -- Mounting Hardware
- MH363YH-300t -- Mounting Hardware
- BSP363YH-(1-5)t -- Mounting Hardware
- BSP363YH-(10-20)t -- Mounting Hardware
- BSP363YH-30t -- Mounting Hardware
- BSP363YH-50t -- Mounting Hardware
Teknik özellikler
| Nominal kapasiteler | 1t – 300t |
| Tam ölçek çıkışı | 2.0 mV/V ±1% |
| Sıfır dengesi | <±0.02 mV/V |
| Doğrusallık hatası | Cap.≤5t: <±0.050%; Cap.≥10t: <±0.30% |
| Tekrarlanabilirlik | Cap.≤5t: <±0.030%; Cap.≥10t: <±0.20% |
| Histerezis hatası | Cap.≤5t: <±0.050%; Cap.≥10t: <±0.30% |
| 30 dakikada sürünme | Cap.≤5t: <±0.050%; Cap.≥10t: <±0.10% |
| Giriş direnci | 770Ω ±30 |
| Çıkış direnci | 700Ω ±5 |
| Gövde malzemesi | Alaşımlı çelik, Nickel Plated |
| Önerilen besleme | 10V (15V Maksimum) |
| Yalıtım direnci | >2 [50V DC] GΩ |
| Sıcaklık kompanzasyon aralığı | -10°C to 50°C / 14°F to 122°F |
| Güvenli aşırı yük | 150% of tam ölçek |
| Kopma yükü | 300% of tam ölçek |
| Sızdırmazlık / IP koruması | Kaynaklı sızdırmazlık / IP67 |
PDF belgeleri ve CAD dosyaları
Üreticinin özgün açıklaması (İngilizce)
The ANYLOAD 363YH is a canister-style alloy steel load cell engineered for both compression and tension force measurement across an exceptionally wide capacity range — from 1 tonne to 300 tonnes. Built with a nickel-plated alloy steel element and a welded IP67 seal, the 363YH delivers reliable performance in demanding industrial weighing environments where durability and measurement accuracy are critical.
The 363YH produces a standard 2 mV/V full scale output and is compatible with 10V excitation (15V maximum), making it straightforward to integrate with most industrial weight controllers and signal conditioners. Non-linearity and hysteresis are tightly controlled across the full capacity range, with repeatability held to ±0.030% or better for capacities up to 5 tonnes. The compensated temperature range of -10°C to 50°C (14°F to 122°F) suits a broad range of indoor and outdoor industrial installations, while safe overload capacity of 150% and breaking overload of 300% of full scale provide a strong margin of protection against shock and surge loads.
Available in eleven standard capacities from 1t to 300t, each model carries a dedicated part number (363YH-Xt), with ATEX, FM, and IECEx approved variants identified by the “-Ex” suffix for use in hazardous or explosive environments. The 363YH is designed to work with Anyload’s MH363YH mounting head, BSP363YH base plate, and REH or EYH mounting hardware, supporting both direct canister-style mounting and multi-point platform scale configurations.
The 363YH is well suited for tank and hopper weighing, platform and floor scales, press force measurement, heavy industrial process weighing, and structural load monitoring. Anyload can assist with system design, accessory selection, and mounting hardware specification. Contact us to discuss your compression or tension weighing application.
See more
Datasheet