1030 Low Profile Single-Point Load Cell
Celtron
The Model 1030 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms. Its use in relatively large platforms, combined with high accuracy and low cost, makes this load cell ideally suited for a wide range of weighing applications, including bench scales, laboratory, money counting and process weighing.
Capacities: 2-15 kg
Aluminum construction
Single-point 350 x 350 mm platform
Teknik dosyalar
| SKU | Capacity | Accuracy / Class Code | Approval / Safety Code |
|---|---|---|---|
| 01030-015K-E0-00X | Capacity : 15 kg | Accuracy / Class Code : Not OIML Approved 1000d | Approval / Safety Code : Not ATEX/FM approved |
| 01030-003K-25-51F | Capacity : 3 kg | Accuracy / Class Code : OIML 2000 d+ III Multiple 5000 div | Approval / Safety Code : FM |
| 01030-010K-25-02X | Capacity : 10 kg | Accuracy / Class Code : OIML 2000 d+ III Multiple 5000 div | Approval / Safety Code : Not ATEX/FM approved |
| 01030-015K-F0-02X | Capacity : 15 kg | Accuracy / Class Code : Not OIML Approved 2000d | Approval / Safety Code : Not ATEX/FM approved |
Description
The Model 1030 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms.
Its use in relatively large platforms, combined with high accuracy and low cost, makes this load cell ideally suited for a wide range of weighing applications, including bench scales, laboratory, money counting and process weighing.
A special humidity resistant protective coating is available as an option which assures long-term reliability. The Model 1030’s built in overload stop can provide mechanical protection against overloading.
The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Features
- Capacities: 2–15 kg
- Aluminum construction
- Single-point 350 x 350 mm platform
- OIML R60
- IP65 protection
- Available with UNC threads
Options
- FM approval available
- IP67 protection available
Certifications
| Parameter | Value | Unit |
|---|---|---|
| Rated capacity (kg) | 2, 3, 5, 7, 10, 15 | kg |
| NTEP/oiml accuracy class | Non-Approved | C2.5 | |
| Max. no. of intervals (n) | 1000 | 2500 | |
| Rated output R.O | 2.0 | mV/V |
| Rated output tolerance | 0.2 | ±%mV/V |
| Zero balance | 0.2 | ±%FSO |
| Ultimate over load | 300 | % of R.C |
| Excitation voltage | 10 | VDC or VAC RMS |
| Max. excitation voltage | 15 | VDC or VAC RMS |
| Input resistance | 415±15 | Ω |
| Output resistance | 350±3 | Ω |
| Insulation resistance | >5000 | MΩ |
| Environmental protection | IP65 |
- FSO - Full Scale Output
- All specifications subjects to change whithout notice.
Application
- Bench scales
- Counting scales
- Grocery scales
Üreticinin özgün İngilizce teknik içerikleri korunmuştur. Teknik PDF belgeleri ürün sayfalarından indirilebilir.